SURFACE FINISH AUGMENTATION OF BORING OPERATION USING IMPACT DAMPERS

Authors

  • Rakhi Wagh Assistant Professor, Mechanical Engineering, International Institute of Information Technology, Savitribai Phule Pune University, Pune, India - 411057.

Keywords:

Boring tool, Impact Damper, Surface Finish, Regression Analysis

Abstract

In the field of manufacturing industries, many new concepts and techniques have been introduced to improve its performance and adaptability to the international standards. In industries, boring operation suffer vibrations due to high over hang of the tool. In this study, improvement of the damping capability of boring tools is attempted using impact dampers. The technique is attempted to reduce the chatter in boring tool and thereby study improvement in surface finish. Slight structural alteration are done to the boring bar and then the effect of Impact Dampers, the overhang length of the boring tools and their cutting conditions on surface finish is studied. Theoretical and practical results are verified using regression analysis.

References

Rajender Singh, Introduction to Basic Manufacturing Processes and Workshop Technology, (2006), New Age International Pvt. Ltd.

M. P. Groover, Fundamentals of Modern Manufacturing – Materials, Processes and Systems, (2010), 4th Edition, John Wiley and Sons.

Heinz Tschatsch Applied Machining Technology, (2008), 8th Edition, Springer.

Geoffrey Boothroyd, Fundamentals of Machining and Machine Tools, (2008), 2nd Edition, CRC Press.

James Bralla, Handbook of Manufacturing Processes – How Products, Components and Materials are Made, (2007), Industrial Press.

Hwaiyu Geng, Manufacturing Engineering Handbook, (2004), McGraw

Ronald Walsh, McGraw Hill Machining and Metalworking Handbook, 3rd Edition, (2006), McGraw Hill.

Bruce J. Black, Worksop Processes, Practices and Materials, 4th Ed., (2010), Newnes (Imprint of Elsevier).

Graham T. Smith, Cutting Tool Technology – Industrial Handbook, (2008), Springer.

E. Budak and E. Ozlu, Analytical Modelling of Chatter Stability in Turning and Boring Operations: A Multi-dimensional Approach, Annals of the CIRP, Vol. 56(1), pp. 401-404, (2007).

Norikazu Suzuki ET. Al., Development of Novel Anisotropic Boring Tool for Chatter Suppression, 5th CIRP Conference on High Performance Cutting, pp. 56 -59, (2012).

Additional Files

Published

15-06-2016

How to Cite

Rakhi Wagh. (2016). SURFACE FINISH AUGMENTATION OF BORING OPERATION USING IMPACT DAMPERS. International Education and Research Journal (IERJ), 2(6). Retrieved from https://ierj.in/journal/index.php/ierj/article/view/303

Issue

Vol. 2 No. 6 (2016): JUNE ISSUE, INTERNATIONAL EDUCATION AND RESEARCH JOURNAL

Section

Articles

License

Copyright (c) 2021 International Education and Research Journal (IERJ)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.