MODELING AND ANALYSIS OF COCONUT SHELL GRINDING MACHINE FOR UTILIZATION OF TEMPLE WASTE FOR SPECIFIC APPLICATION AS MANUFACTURING OF INCENSE STICKS/CONES

Neeraj Kumar , Dr. Navdeep Malhotra , Dr. Bhaskar Nagar

Abstract


Temple waste generation is the one of biggest problem in developed and developing countries considering its obnoxious impact on the environment. India is severely affected by improper waste collection at source and mismanagement and various cultural and social practices practiced since the time immemorial. Especially in Indian temples various types of puja offerings generate wastes such as flowers, fruits, clothes, leaves, coconuts and other food wastes. In this study various techniques were studied and among all those available techniques using temple waste in the form of flowers and coconut shell which remains unused after offering are used for making fragrant incense sticks. For making incense sticks various parameters were considered which are convenient, economical and eco-friendly and easy to reach for the small scale and household enterprises. The desist for manufacturing incense stick could be made according to various consideration like potential of the temple waste in the form of flowers and coconuts which are the major cause of temple waste. Flower waste could be easily grind, but for grinding coconut shell more power is needed. So in this study the coconut shell grinding machine is designed by its modelling on SOLIDWORKS for 10 coconut shell having impact load of 500N by one hammer, here there is a consideration of 4 hammers so distributed 125N impact load each,, using a power source of 5.5KW.After modeling analysis is carried out on ANSYS. The result calculated as maximum equivalent shear stress of 8.23MPa and maximum equivalent elastic strain of 4.11.


Keywords


Temple waste, flowers, coconut shells, grinding machine, incense sticks/cones.

Full Text:

PDF

References


Hadi, Muhammad Ibrahim, Bawa, Mohammed Ahmed, DandakoutaHabou, Ahmed Misbahu and Kamtu, Peter Muar,Improvement on the Design,Construction and Testing of Hammer Mill. American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN : 2320-0936 Volume-6, Issue-3, pp-139-1469(2017)

Nisha Jain, Waste Management of Temple Floral offerings by Vermicomposting and its effect on Soil and Plant Growth, IJOEAR, SSN:[2454-1850] [Vol-2, Issue-7, July- 2016]

KodwoMiezaha, KwasiObiri-Dansoa, ZsófiaKádárc, Bernard Fei-Baffoea, Moses Y. Mensah , municipal solid waste characterization and quantification as a measure towards effective waste management in Ghana Waste Management 46 (2015) 15–27.

R. Udhayasankar and B. Karthikeyan, A Review on Coconut Shell Reinforced Composites, International Journal of ChemTech ResearchCODEN (USA): IJCRGG ISSN: 0974-4290Vol.8, No.11 pp 624-637, 2015

G. Gopal and L. Suresh KumarDynamic Analysis on Hammer of a Coal-Hammer Mill Crusher, International Journal of Current Engineering and Technology

E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 2014

Ajaka E.O. and Adesina A. Design, fabrication and testing of a laboratory size hammer mill, International Journal of Engineering and Advance Technology Studies Vol.2, No.2, pp. 11-21, June 2014

P. S. Masure, Prof. B. M. Patil, Extraction of W aste Flowers, International Journal of Engineering Research & Technology (IJERT)ISSN: 2278-0181 Vol. 3 Issue 11, November-2014

E.Vijaya Kumar, Design and Analysis of Rotor Shaft Assembly of Hammer Mill Crusher, International Journal of Engineering and Management Research, Volume-3, Issue-2, April 2013 ISSN No.: 2250-0758 Pages: 22-30

ManinderKaur, ManpreetKaur, A Review on Utilization of Coconut Shell as Coarse Aggregates in Mass Concrete,IJAER, ISSN 0973-4562 Vol. 7 No.11 (2012).

K.N. Nwaigwe, C. Nzediegwu and P.E. Ugwuoke, Design, Construction and Performance Evaluation of a ModifiedCassava Milling Machine, Research Journal of Applied Sciences, Engineering and Technology 4(18): 3354-3362, 2012ISSN: 2040-7467, 2012

Gurav M. V. and Pathade G. R, Production of Vermicompost from Temple Waste (Nirmalya): A Case StudyUJERT,(2011), Volume 1, Issue 2: 182-192.

ShobhaShouche, Anil Pandey and PraveeshBhati, Study about the changes in physical parameters during vermicomposting of floral wastes, jerd, Vol. 6 No. 1, July-September 2011

Aparanasingh and Ghanshyam Gupta, Generated household and temple waste in Chitrakoot, a pilgrimage point in India: Their management and impact on river Mandakini IJST Vol. 4 No. 7 (July 2011) ISSN: 0974- 6846

Ebunilo P. O., Obanor A. I. and Ariavie G.O, Design and preliminary testing of a hammer mill with endsuction lift capability suitablefor commercial processing of grains and solid minerals in nigeria, Ebunilo.P.O.et al. / International Journal of Engineering Science and TechnologyVol. 2(6), 2010, 1581-1593


Refbacks

  • There are currently no refbacks.

Comments on this article

View all comments




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright © 2020 INTERNATIONAL EDUCATION AND RESEARCH JOURNAL